TECHNOMELT

We are TECHNOMELT distributors - a globally recognized brand from Henkel, known for delivering high productivity and the best cost-benefit ratio in hot melt adhesive technologies.

TECHNOMELT Distributors

TECHNOMELT by Henkel is the leading choice in hot melt adhesives, engineered to deliver optimal results across a wide range of industrial applications. Key advantages include:

Superior cost efficiency and performance
Reliable and consistent bonding results
Proven adhesion across diverse substrates
Exceptional durability for demanding environments
Clean effective final finishes
Broad technology portfolio for every market need
Ongoing innovation for continuous process optimization
bonds across all components types

What Factors Influence Proper Bonding?

Effective bonding with hot melt adhesives requires precise control of: temperature, application volume, open time and set time. Managing these parameters ensure strong, reliable adhesive performance.

Learn More About TECHNOMELT

Featured Applications and Use Cases

Vehicle Interiors
HVAC Filters
Low-Pressure Molding
Air Filters
Fluid Filters

Air Filtration Systems

Automotive and heavy-duty vehicle filters must withstand harsh operating environments. Many applications in this industry require resistance to high temperatures and chemicals. Henkel offers solutions such as:

First/last pleat bonding: EVA and PA hot melt adhesives for a wide temperature ranges.
Cap bonding: Durable two-component polyurethane and epoxy adhesives.
Spiral wrap bonding: PUR and PO hot melts optimized for performance and cost.

Key Benefits:

Wide range of processing speeds
High-temperature resistance
Exceptional durability
Strong adhesion

High-efficiency filters for industrial air

The demands on laboratory, cleanroom and industrial filters are extremely high, as contaminants such as dust can compromise an entire electronic system or skew the results of a laboratory study. Henkel offers a complete range of adhesive solutions for the manufacture of HEPA and ULPA filters:

Pleat: EVA hot melt adhesives with fast opening and setting speeds, foamable for cost savings; PA hot melt for higher temperatures.
Frame Bond: Two-part polyurethane adhesives with a range of viscosities, flame retardant, and an excellent range of pot life/curing speeds.

Key benefits:

Wide range of processing speeds.
High bond strength High flexibility High durability Industry certifications: UL 900 and UL 94 V-0 Foamability

High-efficiency filters for industrial air

Low-Pressure Molding

Low-Pressure Molding Henkel's TECHNOMELT® Low-Pressure Molding materials are a single-material solution that provides a simplified, cost-effective alternative to multi-step, multi-material PCB shielding methods. In a three-step process where parts are placed in the mold set, molded and tested, low-pressure molding eliminates two-part material mixing routines, part preparation (masking), long cure times and material waste.

In addition, these reworkable thermoplastics provide excellent device protection against temperature, vibration, shock, moisture, chemicals and mechanical stress. Sustainable and cost-effective low-pressure molding with TECHNOMELT has been shown to reduce PCB protection costs by up to 30% compared to encapsulation, conformal coating and sealing methods.

Traditional CBP Materials

Material Challenges

Low Pressure Molding Solutions - TECHNOMELT

Potting

Two-part systems; mixing required
Not reworkable
Large equipment investment
24–72 hours to cure
Up to 8 process steps
5–7 BOM part numbers in inventory

One-part; no mixing
Reworkable
Weight reduction
Low waste
Cycle times from 30 seconds to 2 minutes
Stress relief
Green technology; VOC-free

Sealing

Limited by housing dimensions; space constraints
48–72 hours to cure
Up to 6 process steps/li>
5–7 BOM part numbers in inventory

No housing; fewer part numbers
Only 3 process steps
Improved aesthetics
Only 1 BOM part number required
Inline and high-volume processing

Conformal Coating

Very limited mechanical resistance
Cure time of 4 to 12 hours
Up to 8 process steps
3–4 BOM part numbers in inventory

No curing
Resistant to high temperatures, vibration, impacts, and chemicals
Good mechanical resistance
Translucent materials available for optical inspection

Commercial and Residential Filters

Our commercial, residential, and industrial air filters consistently deliver high performance and reliability. Henkel solutions include:

Panel filters (HVAC): hot melt and PVA water-based adhesives for bonding plastic and paper frames; two-part polyurethanes for metal and plastic frames.
Bag filters: hot melt and PVA water-based adhesives for seam sealing and frame bonding with a range of temperature resistance and open times/curing speeds.

Key benefits:

Wide range of processing speeds.
High temperature resistance High durability High bond strength

Insulation Board Assembly

Insulation board assembly involves bonding the insulation material to the painted steel cabinet shell. The use of high initial tack hot melt or water based adhesives provides a strong and immediate bond between the components.